DC Brush Collection Wound Motor for CZPT Pump and CZPT System and Raise
PG36M555 Series
voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Velocity selection: 3000-9500rpm
electrical power: 3.three-13w
Typical programs: Central air-conditioning valve, Amusement gear, Coin
Refund devices, Grill, Oven, Peristaltic pumps, ATM bank
Automated technique, Robotic, Healthcare tools, Workplace
Gear, House appliances, Computerized actuator.
Excess weight: 320~400g/PCS(approx)
Packing particulars: CTN dimension: 32X28XH26cm 40PCS/CTN G. W. 16Kgs
| Gearbox data: |
| |
| Amount of phases |
1stages reduction |
two stages reduction |
3 stages reduction |
four stages reduction |
five levels reduction |
| Reduction ratio |
3.75.two |
thirteen.719.226.9 |
fifty.971.299.5139 |
188264369516721 |
6699771367191126723736 |
| gearbox size ” L” mm |
26.4 |
32.6 |
38.nine |
45.three |
52.5 |
| Max.Working torque |
three.0Kgf @ cm |
six.0Kgf @ cm |
eight.0Kgf @ cm |
twelve.0Kgf @ cm |
20Kgf @ cm |
| Max. Equipment breaking torque |
nine.0Kgf @ cm |
18.0Kgf @ cm |
24Kgf @ cm |
36Kgf @ cm |
60Kgf @ cm |
| Max. Gearing effectiveness |
90% |
81% |
seventy three% |
sixty five% |
59% |
|
|
| Motor info: |
| |
| Motor name |
Rated volt.v |
No load |
Load torque |
Stall torque |
| Recent |
Velocity |
Present |
Pace |
Torque |
Output electricity |
Torque |
Present |
| mA |
r/min |
mA |
r/min |
gf @ cm |
W |
gf @ cm |
mA |
| RS-555123000 |
12 |
≤140 |
3000 |
≤800 |
2200 |
a hundred and fifty |
three.3 |
600 |
3000 |
| RS-555124500 |
12 |
≤220 |
4500 |
≤1200 |
3300 |
220 |
seven.two |
880 |
7800 |
| RS-555126000 |
12 |
≤350 |
6000 |
≤2000 |
4500 |
three hundred |
thirteen.five |
1200 |
6000 |
| RS-555243000 |
24 |
≤70 |
3000 |
≤400 |
2200 |
150 |
3.3 |
600 |
1600 |
| RS-555244500 |
24 |
≤110 |
4500 |
≤600 |
3300 |
220 |
7.two |
880 |
3000 |
| RS-555246000 |
24 |
≤180 |
6000 |
≤1000 |
4500 |
three hundred |
thirteen.five |
1200 |
4000 |
1This table lists some motors parameters, other folks make sure you refer to specific parameters of rs-555.htm”
2Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput pace:motor speed / reduction ratio. |
|
|
| NOTE: |
1 Gearmotor named methods: e . g . SG-555123000-99.5K Motor please refer to the motor information RS-555123000.
Gearbox please refer to gearbox information reduction ratio99.five .Associated to gearmotor output speed and torque please
refer to motor information.
2 Motor can be set up wiht magnetic encorder. encorder parameters please refer to me-37.htm .
3CZPT output shaft right after minimizing: eight.0mm. other sizes of then output shaft can make as consumer request.
4Chart only for reference,goods shall prevail the entity. |
|
Company Introduction
